欧美日本一道本一区二区_亚洲免费影视_91手机在线看片_精品欧美成人高清在线观看_少妇作爱bbbb免费看_51久久夜色精品国产水果派解说

FLMH-1205BR_FLMH-1205SS_FLMH-1210AL_FLMH-1210BR液體流量計OMEGA

直讀雙刻度

范圍0.1至150 gpm（0.4至550 lpm）

高壓：3500 psi（黃銅或鋁）；6000 psi（不銹鋼）

高溫：至116°C（240°F）（標準）或204°C或316°C（400或600°F）（可選）

安裝在任何位置

繼電器報警和模擬輸出可選

油或水型號

FLMW和FLMH變面積流量計可以直接安裝在流體管線上，無需流量矯直機或特殊管道。彈簧和活塞式總成使這些流量計能夠安裝在任何位置，并保護它們不受粘度變化的影響。適用于水或油，鋁，黃銅或不銹鋼材質。

帶可選模擬輸出（-MA）的FLMW或FMLH系列通常用于將與流量成比例的信號傳輸到過程控制器、PLC、記錄器或面板安裝顯示器。使用-ma選項，用戶可以通過連接適當的管腳在讀取0至2000赫茲方波脈沖、0至5伏直流模擬信號或2線4至20毫安模擬信號之間進行選擇。

FLMH-1205BR_FLMH-1205SS_FLMH-1210AL_FLMH-1210BR液體流量計OMEGA

Accuracy: ±2% FS over the entire scale range

Repeatability: ±1%

Flow Measuring Range: 0.4 - 560 lpm (0.1 - 150 gpm)

Maximum Operating Pressure:

   Aluminum and brass monitors: 3500 psig (240 Bar)

   Stainless steel monitors: 6000 psig (410 Bar) up to 116°C (240°F)

Maximum Operating Temperature: 

   Standard Models: 116°C (240°F)

   High Temp (-HT) Models: 204°C (400°F) max

   Ultra High Temp (-UHT) Models: 316°C (600°F) max

Pressure Differential: download spec sheet for pressure drop graphs

Standard Calibration Fluids:

   Oil monitors: DTE 25 @ 43°C (110°F), 0.873 sg

   Water monitors: tap water @ 21°C (70°F), 1.0 sg

Maximum Particle Size: 76 microns

Relay (Optional): 1 or 2 form “C” relays, rated 10 A @ 125 or 250 Vac or 0.25 A @ 250 Vdc

Mechanical Life: >107 cycles

Analog Output (Optional): Supply voltage 12 to 35 Vdc, field selectable for 0 to 5 Vdc (100 W minimum load), 0 to 2000 Hz square-wave pulse or 4 to 20 mA; Rmax = 50 (Vs-12). Vs = supply voltage DC

Installation Dimensions: 

   1/4 and 1/2 NPT Sizes: 1-7/8 OD x 6.6" length

   3/4 and 1 NPT Sizes: 2-3/8 OD x 7.2" length

   1-1/4 and 1-1/2 NPT Sizes: 3-1/2 OD x 10.1" length

FLMH-1205BR_FLMH-1205SS_FLMH-1210AL_FLMH-1210BR液體流量計OMEGA

The FLMW and FLMH variable area flowmeters can be installed directly in the fluid line without flow straighteners or special piping. The spring-and-piston type assembly enables these flowmeters to be mounted in any position and protects them against changes in viscosity. Available scaled for water or oil, in Aluminum, Brass or Stainless Steel bodies.

The FLMW or the FMLH Series with the optional analog output (-MA) are typically used to transmit a signal proportional to the flow rate to a process controller, a PLC, a recorder, or a panel-mount display. With the -MA options the user can choose between reading a 0 to 2000 Hz square-wave pulse, a 0 to 5 Vdc analog signal, or a 2-wire 4 to 20 mA analog signal by connecting the appropriate pins.